1. Specifications and other information of the Antminer V9 are as mentioned below.

2. The Minimum Order Quantity (MOQ) for this batch is 5 units and the maximum number of units in a single order cannot exceed 300. 

3. Please select the correct address and shipping method for shipping before you submit your order because, for this batch, the shipping address and shipping method cannot be changed after the order has been submitted.

4. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

5. The shipping for this batch will be arranged within 10 working days after Bitmain has received full payment. We advise you to research and prepare in advance for customs' clearance in your country to avoid delays or unexpected costs.

6. You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the V9.

7. Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.