Bitmain APW3++, S9-L3-D3
$150.00
Stok Durumu: Stokta Var!
Teslimat Zamanı: Sevk tarihinden 7-10 gün içerisinde
1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer X3 miner.
4. All items added to cart are shipped according to the item with the latest shipping date in the cart. If you would like to receive an item earlier, please place a separate order for it.
5. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won't be honored.
Specifications
DC Voltage 12.15V
Rated Current(220V input) 133A
Rated Current(110V input) 100A
Rated Power(220V input) 1600W
Rated Power(110V input) 1200W
Ripple & Noise <1%
Output Voltage Regulation <2%
Source Regulation <1%
Load Regulation <1%
Setup, Rise Time <2S
Power off Protection Trip Time >9mS
Interface Type 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
Noise Level <43DB
Voltage Range 100-240V AC
Starting Voltage 95-105V AC
Input Frequency Range 47-63Hz
Power Factor >0.95 (full load)
Leakage Current <1.5mA (220V 50Hz)
Low-voltage Input 80-89V AC
Protection Output Short Circuit Yes
Output Overcurrent 134-185A max.
Overheat Protection Yes
Environment Operating Temperature -20°C - 50°C
Conditions Operating Humidity 20% - 90% relative humidity (non-condensing)
Structure Dimensions 220mm*108mm*62mm
Cooling Fan Forced-air cooling